BLD ベース – リード&ドラム サウンド ジェネレーター
Base -Lead & Drum Generator
3ユーロラックモジュール (3U)
幅 : 24 HP 幅 (1HP=5.08mm)
奥行き: 25mm (フロントパネル裏からの奥行き)
重さ: 0.5kg
電流 current draw: 30mA
リボンケーブルコネクター使用上の注意
BLDは、ベースドラム音に重点を置き、
BLDには、メイン・サウンド・ジェネレータ(
)があります。
オシレーター:
オシレータには2つのマニュアルピッチコントローラ (FINE, COARSE) と、
ウェーブフォームとシェイプ間のミックスはマニュアル・
オシレーターレベルはマニュアルコントロール(ゼロ スルーノミナルシグナルストレンスからサチュレート)。パルス・
ローパス・フィルター:
ローパス・
とNOISE LEVEL)。
ノイズ・ジェネレーター:
ノイズ・
ARとAHR :
ARとAHRトランジット・
アンプリファイアー:
アンプリファイアのゲインはARのミックス、AHR、インプット VELOCITYに接続された外部シグナルによってコントロール
BLD, Bass – Lead & Drum sound generator
3U Eurorack module,
24HP wide,
25mm deep
0.5kg
Current draw: 30mA
How to use Cwejman Ribbon cable connectors
The BLD has all components and function necessary for generating bass lead and drum sounds with focus on bass drum sounds.
The BLD contain main sound generator (OSCILLATOR) and noise generator and modifiers such as low pass filter, amplifier and two transient (contour) generators.
Oscillator has two manual pitch controllers (FINE, COARSE) and two inputs for controlling the pitch by external signals (FM1, levelled, bipolar pre-patched to transient generator AR and FM2, calibrated to 1 Volt/octave).
Waveforms and mix between shapes is controlled manually from triangle, mix between triangle and pulse, pulse, mix between pulse and saw tooth and saw tooth).
Oscillator level is controlled manually from 0 thru nominal signal strength to saturated (curved, for more punch). Pulse width is controlled manually and by an external signa (PWM).
NOISE GENERATOR is connected to the low pass filter and to the amplifier (NOISE LEVEL). The noise generator can be routed in to the amplifier (PRE) or directly to the output AMP (POST).
The noise generators level is also controlled by pre-patched AR generator thru input NOISE LEVEL.
AR and AHR transient generators are activated manually by the push button
TRIG and/or by an external signal (input TRIG). Attack, Hold and Release are manually controlled and by an external signals connected to inputs A1, R1 (AR) and A1, HOLD and R2 (AHR).
AMPLIFIERs gain is controlled by mix of AR and AHR and by an external signaln connected to the input VELOCITY
サウンドクリップ Sound clips
External links and demos
https://www.instagram.com/p/BUXhVZvBNEq/